Is an Unvented Cylinder Worth It? Pros, Cons and Costs
An unvented cylinder gives you hot water at mains pressure, with no water tank in the loft. For a home with two or more bathrooms, that is often the main reason to fit one. The catch is that it needs more safety kit and a qualified installer, so the choice depends on your water supply and your home as much as your budget.
How it differs from a vented cylinder
A vented cylinder is fed from a cold water tank in the loft, so the water pressure at your taps depends on how high that tank sits. An unvented cylinder connects straight to the mains. The water pressure at the taps comes from the mains supply, not from a tank.
Because there is no vent to the air, unvented systems need extra safety measures. Approved Document G, the building regulations guidance for hot water safety, says unvented systems “require extra safety precautions.” That is the main reason the install rules are stricter.
The pros
- Strong, steady pressure at every outlet, which suits power showers and two bathrooms running at once.
- No cold water tank in the loft, so no tank to sit in a cold loft.
- The cylinder can sit in a utility room or cupboard, where a tank would not fit.
The cons
- The install is more involved. You need a tundish, a discharge pipe and two independent safety devices.
- It must be installed by a qualified person, and the work needs building control sign-off.
- Servicing matters more. The relief valves and discharge pipe need checking by a qualified engineer.
- If the mains supply is cut off, the cylinder cannot supply hot water, because it has no stored cold water tank to draw on.
Will your water pressure be enough?
Approved Document G does not give a set number. It says the supply must provide pressure and flow “sufficient for the operation of sanitary appliances.” Some manufacturers quote a minimum mains pressure of about 1.5 bar and a flow of about 20 litres a minute for their cylinders. Check your own pressure before you buy, and ask the installer to test it on site. Our guide to what your boiler pressure should be explains the readings to look for.
If you are unsure what your pressure is, our guide to boiler losing pressure explains the common causes. If your mains pressure is low, a vented cylinder can work better, because the tank in the loft supplies the pressure. A vented system also keeps hot water running when the mains is off, which is useful in some homes.
What the install rules require
Installing an unvented cylinder is notifiable work under Part G of the building regulations. There are two routes:
- A registered installer who is part of a competent person scheme can self-certify the work. They give you a building regulations certificate and do not need to notify building control in advance.
- Anyone else must notify building control before the work starts.
The installer also needs proper training. The Hot Water Association and the Heating and Hotwater Industry Council say competence can be shown through a competent person scheme or an AD-G3 certificate.
Some of the safety details the guidance covers:
- A tundish with an air gap, mounted vertically.
- A discharge pipe that runs downwards, with a fall of at least 1 in 200.
- Two independent safety devices, as the guidance requires.
Because the rules are detailed, it is worth asking for proof of the installer’s qualification and their building regulations certificate before the work starts.
What it costs
We have not put price ranges in this article. The cost depends on the cylinder size, the pipework, whether a new tundish and discharge pipe are needed, and whether the old vented setup has to come out.
If you want a fixed price for your home, AR Heating will quote the full job before any work starts, including the safety kit and the certificate. Call +44 7800 657141. WhatsApp works on the same number.
Keeping it safe over time
Get the system checked by a qualified engineer at regular intervals. The relief valves and the discharge pipe are the parts most likely to need attention. Check the warranty terms for your cylinder and keep a written record of each service.
Is it worth it for your home?
Choose an unvented cylinder if you have good mains pressure, more than one bathroom, and want strong water at every tap. Stay with a vented cylinder if your mains pressure is low, you already have a loft tank that works well, or the extra install and service cost does not suit your budget.
We fit and service these through our Megaflo cylinder page, and if you are replacing a whole boiler and cylinder at once, our boiler installation page covers that job too. If you are not sure which fits your home, book a survey first. We can test your pressure and tell you which option makes sense before you spend money on the cylinder.
Sources
- Ministry of Housing, Communities and Local Government, Approved Document G: Sanitation, hot water safety and water efficiency
- Hot Water Association and Heating and Hotwater Industry Council, Unvented hot water systems: questions and answers (v1.5, July 2026)
- WRAS, Hot water systems booklet (February 2024)